GReddy Supreme - SP

Fits:
   1994-01 Integra RS / LS _{(w/  B18B-series engine)}
    2000-01 Integra GSR _{(w/  B18C-series engine)}

The classic SP exhaust for iconic (DC) Acura Integra has returned, but this time this Supreme SP is designed with larger diameter piping to suit tuned 94-01 Integra LS/RS and 00-01 Integra GSR. Ideal for bolt-on turbo or supercharger kits or high-flow N/A applications, this version features large diameter 76mm (3”) muffler and piping, with only a short inlet portion of 63.5mm (2.5”) to allow it to still bolt up to factory catalytic converter flanges. The large mid-pipe resonator and off-set oval Supreme SP muffler allow for deep rich exhaust note throughout the B18 engine’s RPM range. Careful attention to routing allows for simple install, and OEM like fitment. All GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

SOUND CLIP

Chassis:  DC
Engine:  B18 (94-01 B18 LS / RS & 00-01 B18C GSR)
Type:    Cat-Back Exhaust

Number of pieces:  3 pcs
Piping:   76 mm (3 ") - slight taper of 2.5" to fit the factory catalyic-conveter 
Tip:   105mm (4.1")
Gasket(s):   3.0" oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  TBA lbs 
Sound level:  TBA dB(a)

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for ’09-’14 Acura TSX offers a refine exhaust note with elegant styling to match. The classic dual oval muffler system with large free flowing 63.5mm (2.5”) piping produces no exhaust drone. Thanks to the two large SP mufflers, it has excellent sound suppression at idle and cruising. In spirited acceleration, the exhaust note comes to life with a deep rich GReddy sound. The muffler and tip best match the TSX’s aero styling. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

SOUND CLIP

Chassis:  CU2
Engine:  K24A2
Type:   Dual Muffler Cat-Back Exhaust

Number of pieces:  4pcs
Piping:   63.5 mm (2.5 ")
Tip:   102 mm (4.0 ")
Gasket(s):   70mm oval (qty: 3 included) replacement
Resonator:   Yes

Weight:  51.9 lbs 
Sound level:  84 / 85 dB(a) @4500

HP:  +3  hp
TRQ:  +3  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for the Ford Focus ST combines, classic GReddy styling and sound to boost power from the modern American EcoBoost powerplant. Large 76mm (3”) diameter mandrel piping is carefully routed beneath ST chassis through two inline, compact Supreme SP straight-through muffler sections. Dual 102mm (4”) GReddy double walled tips perfectly finish-off the system through the center exit bumper. Power tests have shown substantial increase in mid-range power and torque, with peak gains of 24whp and 11ft.lbs. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.
 

SOUND CLIP

Chassis:  Global C Platfrom
Engine: EcoBoost
Type:   Cat-back exhaust, center exit
 

Number of pieces:  4pcs.
Piping:   76 mm (3.0")
Tip(s) 2x 102 mm (4.0")
Gasket(s):    3.0 " oval (qty: 3 included) replacement
Resonator:   Yes
 

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: 96 dB(a)
 

HP:  +24.52 hp
TRQ:  +11.98 ft-lbs
 

NOTE(S): *kit includes spacers to remount the under brace lower, to make clearance for the larger diameter piping.

[ DYNO GRAPH ]

  * Best match - GReddy 76mm MX Racing Down-pipe (sold separately)  p/n 10590701

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

converts coupe se exhaust to work on the sedan

4dr. adapter only. use with p/n 101528208

The GReddy Honda Civic Type R exhaust keeps with the SP tradition of a street performance exhaust. Careful attention to both sound and performance was considered in the design of this system. The free flowing straight-though exhaust on the CTR’s turbocharged K20C1 engine netted just 88dba on our standardized revving sound test with an amazing 16whp increase on our chassis dyno. Large diameter, stainless-steel, 3” mandrel-bent piping is tucked up in the FK8 Civic Type R chassis to a larger specially shaped SP oval muffler, to maximize flow and control the sound quality. Exhaust flow exits through dual 2.5” ports on the muffler canister to carefully positioned, high polished exhaust pipes and dual-wall Tips. The Civic Type R’s rear diffuser exhaust opening is elegantly completed with a special GReddy Supreme SP badge, between the dual 4.5” SP tips. Like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhausts carry a Limited Lifetime Warranty.

SOUND CLIP

* AVAILABLE OPTION ITEMS: _{compatiable with Supreme SP} 
   Full 3" Forward Mid-pipe Replacement p/n 10558601
   3" Front Over-pipe Option p/n 10558600

Chassis:  FK8
Engine:  K20C1  Turbo
Type:   Cat-back single oval muffler
               with dual tips & spl. Supreme SP badge

Number of pieces: 3
Piping:   76 mm (3 ")
Tips:   115 mm (4.5 ")
Gasket(s):    3 " oval (qty: 2 included) replacement
Resonator:   no

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test:  88 dB(a) @3400rpm (limited)

HP:  +16  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

FG4  (K24) 2.4L
*Sedan

4 door adapter

Use this p/n 11050103 extention adapter allows the installation of GReddy 2012- Honda Civic Si (Coupe) exhaust on the 2012- Honda Civic Si (Sedan).
 

   *GReddy Exhaust System sold seperately: Evo3 | SPelite

*Also see our GReddy Air Intake System for the Civic Si

The SP exhaust for iconic (EG) Honda Civic Si hatchback is back. This time the Supreme SP is tuned specifically for modified EG Civics. Designed to enhance performance for either bolt-on turbo kits or larger displacement engine swaps, this version features large diameter 76mm (3”) piping, with only a short inlet portion of 63.5mm (2.5”) to allow it to still bolt up to factory catalytic converter flanges. The large mid-pipe resonator and off-set oval Supreme SP muffler allow for deep rich exhaust note throughout the RPM range. Careful attention to routing allows for simple install, and OEM like fitment. All GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

SOUND CLIP

Chassis:  EG
Engine:  D16 (B series / K series)
Type:  XL diameter cat-back

Number of pieces:  3 pcs.
Piping:   76 mm (3.0 ")
Tip:   115 mm (4.5 ")
Gasket(s):    3.0 " oval (qty: 2 included) replacement
Resonator:   yes

Note: short length of 2.5" piping to bolt-on to OE style catalytic converter flanges.

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: 92* dB(a) - * with GReddy Turbo Kit.

HP:  +TBA  hp -* ideal for turbocharged applications
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Legacy of the SP lives on with our best street performance system yet, the Supreme SP!

   more info coming soon...

Models: EX, Si

Chassis:  EJ / EM
Engine:  D16 / B16
Type:   TBA system

Number of pieces:  TBA
Piping:   TBA mm (TBA ")
Tip:   TBA mm (TBA ")
Gasket(s):    TBA " oval (qty: X included) replacement
Resonator:   TBA

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound level:  TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

This special Supreme SP exhaust for EK-chassis Honda Civic hatchback is part of the new modern GReddy take on classic tuned Honda(s). Designed specifically to enhance performance for larger displacement or turbocharged engine swaps, this version features large diameter 76mm (3”) piping, with only a short inlet portion of 63.5mm (2.5”) to allow it to still bolt up to factory style (K20) catalytic converter (downpipe) flanges. The four piece design features a large mid-pipe resonator and off-set oval Supreme SP muffler allow for deep rich exhaust note throughout the RPM range. Careful attention to routing allows for simple install, OEM like fitment and that iconic GReddy styling. All GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

SOUND CLIP TBA

Chassis:  EK
Engine:  K series swap
Type:   XL diameter cat-back

Number of pieces:  4
Piping:   76 mm (3.0")
Tip:   102 mm (4.0")
Gasket(s):    3.0" oval (qty: 3 included) replacement
Resonator:   yes

Notes: designed to bolt-on to K-swapped 3-bolt (76mm bolt pattern spread) catalytic conveter flange.

Weight:  31.7 lbs
Sound Comparison (SAE J1169) Test: 100 dB(a) @5500 RPM

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for ever-popular (FG) Civic Si coupe embraces the classic GReddy Civic styling that has made the SP line so popular over the years. Stand out features of this latest version include: larger diameter 63.5mm (2.5”) piping, updated resonator, improved muffler section, and our new limited lifetime warranty. Like all GReddy exhausts, it’s the ideal combination of fitment, styling, performance and deep exhaust note, that sets it apart from the competitors. It is also designed to be compatible with both Si models; coupe and sedan (using the optional 11050104 adapter.) Each GReddy Supreme SP system is a fully hand-welded 304 Stainless-steel exhaust.

SOUND CLIP

Models: Si Coupe, Si Sedan-use with 11050104*

Chassis:  FG2
Engine:  K20
Type:   Cat-back exhaust

Number of pieces:  3pcs
Piping:   63.5 mm (2.5 ")
Tip:   102 mm (4.0 ")
Gasket(s):    2.5 " oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  27.5 lbs   (Stock weight  27.3 lbs)
Sound Comparison (SAE J1169) Test:  90 dB(a) 

HP:  +5  hp
TRQ:  +3  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for the 9th generation, (FB) Civic Si features our signature GReddy layout, styling and sound, with new revised piping diameter. It is designed to be compatible with both Si models; coupe and sedan (using the optional 11050108 adapter.) The straight-through resonator and specially-made oval muffler with off-set extended tip allows the system to follow the Civics’ bodies lines and help reduce drone and high pitch frequencies. It also provides good power gains throughout the usable power band. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Models: Si Coupe (use with 11050108 4dr adapter for sedans)
Chassis:  FG4 (FB6 4dr. with adapter)
Engine:  K24
Type:   cat-back exhaust system

Number of pieces:  3pcs.
Piping:   63.5 mm (2.5")
Tip:   105 mm (4.0 ")
Gasket(s):    2.5 " oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  28.0 lbs   (Stock weight  30.8 lbs)
Sound Comparison (SAE J1169) Test: 94.0 dB(a)

[DYNO]

HP:  +11  hp
TRQ:  +2  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for the Honda S2000 provides everything you want in a street performance system; superb looks, refined sound with performance gains. The full stainless-steel, cat-back, Supreme SP, with dual oval SP mufflers and smaller 105mm (4.1") double wall tips is designed to work with both the AP1 and AP2 S2000 chassis. Extensive internal muffler and resonator tuning, provide excellent sound suppression for a comfortable, but sporty, ride quality. The large 2.5” (63.5mm) straight through design improves engine exhaust efficiency for performance gains.  And like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:  AP1 / AP2
Engine:  F20 / F22
Type:   Dual Muffler Cat-Back

Engine: F20 / F22
Type: Cat-back system

Number of pieces: 3pc
Piping: 63.5mm ( 2.5 in.) - 2x 63.5mm ( 2.5 in.)
Tip: 105mm (4.1")
Gasket(s): 2.5" oval (qty: 2 included) replacement
Resonator: Yes

Weight: 37.6 lbs (Stock weight 52 lbs)
Sound Comparison (SAE J1169) Test*:  94 /94.5  dB(a)

HP*: 6whp
TRQ*: 2ft-lbs

*test results may vary


*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

2017-on  Honda Civic Si 4door Sedan (only)

Designed specifically for the 10th generation (FC1) Sedan version of the Honda Civic Si, is our dual muffler Supreme SP cat-back exhaust. With similar features as our coupe version, the longer sedan version features high-flow with refined exhaust note. Under wide-open-throttle, spirited driving, the system offers the classic GReddy deep exhaust growl. To enhance the performance of the turbocharged 1.5L engine, this 3piece,  cat-back exhaust connects to the factory piping (our system bolts to the factory exhaust system at the flange behind the engine/transmission) and expands to large 3” (76mm) forward-midpipe and mid-pipe that split to two polished, straight-through SP oval mufflers and dual center-exit dual-wall GReddy tips. The sedan version has a slight more aggressive tip angle and muffler combination is a better compliment to the Si sedan’s sporty, but wide rear bumper tip opening. Like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhausts carry a Limited Lifetime Warranty.

SOUND CLIP  

Chassis:  FC1 4door Sedan
Engine:  L15  Turbo
Type:   3" Cat-back with dual oval muffler with dual tips

Number of pieces: 3
Piping:   76 mm (3 ")
Tips:   2x 115 mm (4.5 ")
Gasket(s):    3 " oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test:  TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

To BUY NOW, please contact an Authorized GReddy Dealer. This item is currently not available through our online store.

GReddy Supreme SP – HG (High Grade) is our premium stainless-steel cat-back exhaust for the (FK8) Civic Type R. Besides the looks of the HG’s fully polished stainless-steel mandrel-bent piping and unique, functional GReddy three tip configuration; extensive research and development has lead to this supreme exhaust system. Careful attention was placed on the Civic Type-R’s exhaust sound characteristics, when incorporating our purposeful, high-flow, tri-routing layout. The large 76mm (3”) diameter piping flows smoothly through a large mid-pipe resonator and then branches out to the high-flow 3” center SP muffler and the two side-mounted sound chambers, before exiting the GReddy triple exhaust tips. Like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhausts carry a Limited Lifetime Warranty.

SOUND CLIP

* AVAILABLE OPTION ITEMS: _{compatiable with Supreme SP (HG)}
   Full 3" Forward Mid-pipe Replacement p/n 10558601
   3" Front Over-pipe Option p/n 10558600

Chassis: FK8
Engine: K20C1 Turbo
Type:  Premium 3" Triple Tip *HG" - Cat-back exhausts

Number of pieces: TBA
Piping: 76mm (3") - 3x (1x 76mm & 2x 63.5mm)
Tips: Triple = 105mm (4.1") - 115mm (4.5") - 105mm (4.1")
Gasket(s): 3 " oval (qty: 2 included) replacement
Resonator: yes (1 center / 2 rear side)

Weight: TBA lbs (Stock weight TBA lbs)
Sound Comparison (SAE J1169) Test: TBA dB(a) @3400rpm (limited)

HP: TBA hp
TRQ: TBA ft-lbs

      *HG - High Grade - fully high polished

*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

To BUY NOW, please contact an Authorized GReddy Dealer. This item is currently not available through our online store.

The Supreme SP cat-back exhaust, for the turbocharged 10th generation Honda Civic Sport hatchback, improves the performance, sound quality and styling, by applying our signature SP (Street Performance) ideals into the design. The system not only incorporates large 76mm (3”) piping, but smoothes out and simplifies the heavier, factory, two muffler layout with a free flowing, compact single entry, dual outlet, oval SP muffler. This allows the turbocharged L15 engine to be more efficient for added performance, without having drone or being loud. The Supreme SP sound level was carefully tuned not to require any additional resonators; this also helps lighten up the system. The polished stainless-steel center-exit exhaust is finished off with stylish dual, double-wall, slant cut GReddy tips, to enhance the Civic’s sporty rear diffuser. Like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhausts carry a Limited Lifetime Warranty

SOUND CLIP

Chassis:  FK7
Engine:  L15  Turbo
Type:   Cat-back single oval muffler with dual tips

Number of pieces: 3
Piping:   76 mm (3 ")
Tips:   105 mm (4.1 ")
Gasket(s):    3 " oval (qty: 2 included) replacement
Resonator:   no

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test:  TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

2017-on  Honda Civic Si Coupe (only)

The unique dual muffler Supreme SP for the 10th generation Honda (FC3) Civic Si coupe features high-flow with a refined exhaust note. Under wide-open-throttle, spirited driving, the system offers the classic GReddy deep exhaust growl. To enhance the performance of the turbocharged 1.5L engine, this 3piece, cat-back exhaust connects to the factory piping (our system bolts to the factory exhaust system at the flange behind the engine/transmission) and expands to large 3” (76mm) forward-midpipe and mid-pipe that split to two polished, straight-through SP oval mufflers and dual center-exit dual-wall GReddy tips. This tip and muffler combination is a great compliment to the Si’s sporty, but wide rear bumper tip opening. (We also offer a similar, application-specific system for the (FC1) Civic Si sedan.)  Like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhausts carry a Limited Lifetime Warranty.

SOUND CLIP  

Chassis:  FC3 coupe
Engine:  L15  Turbo
Type:   3" Cat-back with dual oval muffler with dual tips

Number of pieces: 3
Piping:   76 mm (3 ")
Tips:   2x 115 mm (4.5 ")
Gasket(s):    3 " oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

To BUY NOW, please contact an Authorized GReddy Dealer.   This item is currently not available through our online store.

To further improve the the flow and performance of your GReddy (FK8) cat-back exhaust for the Civic Type R, we have released this optional full 3" (non-tapered) forward midpipe, that will replace the orginal Supreme SP (& HG) forward midpipe. The slight taper in the standard Supreme SP forward midpipe (is designed to mate upto the factory overpipe flange and) more than adequate for use with the Civic Type R factory catalytic conveter and factory front overpipe, but when upgrading these units, you may aslo want to maximize the flow with a full 3" (76mm) stainless steel forward midpipe upgrade. Specially designed flanges and gaskets allow for a perfect match to our emissions friendly (cat-back) 3' Front Overpipe (p/n 10558600 sold separately).  

For more info. see (here)

Chassis:  FK8
Engine:  K20C1  Turbo
Type:   Replacement forward midpipe replacment for Civic Type R Supreme SP p/n 10158214 (& HG p/n 10158215)

Notes: This upgrade should be compatiable with many other popular aftermarket 3" downpipe and overpipe combos.
             (also compaitable with the GPP 3' Front Overpipe p/n 10558600)

Number of pieces: 1
Piping:   76 mm (3 ")
Gasket(s):    3 " spl. 3-bolt (qty: 1 included) replacement + 3 bolts and nuts
 

Maximize the flow of our your 3" (FK8) Civic Type R cat-back exhaust with the simple installation of our optional 3" (76mm) Front Overpipe and full 3" upgrade for the Supreme SP (& HG) Forward Midpipe.   These two upgrades will allow you to take full advanate of flow of your 3" Supreme SP exhaust.  It includes p/n 10558600 - FK8 Front Over Pipe and p/n 10558601 - FK8 Forward Midpipe upgrade for a GReddy Supreme SP ( & HG) exhaust for the FK8 Honda Civic Type R. 

For more Info. see (here)

Chassis:  FK8
Engine:  K20C1  Turbo
Type:   Replacement front overpipe and full 3" upgraded forward midpipe for Civic Type R 

Notes: Installs after factory downpipe/catalytic converter (or aftermarket equivalent) and replaces the first section of piping from the Supreme SP & HG exhaust.  

Number of pieces: 2
Piping:   76 mm (3 ")
Gasket(s):    3" 3-bolt, spl. OE-style 3-bolt (qty: 1 each included) replacement + 3 nuts and bolts
Flex Joint:   yes

Maximize the flow of our your 3" (FK8) Civic Type R cat-back exhaust with the simple installation of our optional 3" (76mm) Front Overpipe with flex pipe. This full 3" (76mm), emissions-friendly, cat-back, stainless-steel, front over-pipe for (FK8) Civic Type R, installs with common sized, high quality laser cut 3-bolt flanges, in between the factory down-pipe (or aftermarket equivalent) and GReddy Supreme SP ( & HG) exhaust with Full 3" Forward Mid-pipe p/n 10558601 (or many popular aftermarket 3" exhaust systems) 

For more info see: (here)

Chassis:  FK8
Engine:  K20C1  Turbo
Type:   Replacement front overpipe for Civic Type R 

Notes: Installs inbetween factory downpipe/catalytic converter (or aftermarket equivalent) and popular 3" exhausts with common 3" 3-bolt flange.     Supreme SP & HG must also use our replacement Full 3" Forward Midpipe upgrade (p/n 10558601)

Number of pieces: 1
Piping:   76 mm (3 ")
Gasket(s):    3" 3-bolt and spl. OE-style 3-bolt (qty: 1 each included) replacement + 3 nuts and bolts
Flex Joint:   yes

The Supreme SP, for the Hyundai Veloster, features an excellent combination of performance and sound. Large 76mm (3.0”) mandrel-bent piping is carefully routed underneath the compact chassis to an extra large resonator and compact, rear mounted, oval SP muffler. To finish off the system, a smooth dual 63.5mm (2.5”) split leads to a functional, remote center exit with 102mm (4.0”) GReddy engraved tips. Power tests have shown increased performance throughout the power-band, with peak gains of 12whp and 6ft.lbs. Sound is well controlled for street use, with no passenger compartment drone. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:  FS
Engine:  1.6L, Gamma T-GDI
Type:   Cat-back, remote center exit tips

Number of pieces:  3pcs.
Piping:   76mm (3.0") - 2x 63.5mm (2.5")
Tip(s):  2x 102mm (4.0")
Gasket(s):    3.0 " oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  20.5 lbs   (Stock weight  43.2 lbs)
Sound level:  87 dB(a) 4750rpm

HP:  +12  hp
TRQ:  +6  ft-lbs

(* fits Veloster R-Spec Turbo model)

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for sporty Lexus GS-F offers our renowned exhaust note with graceful but aggressive styling. The straight-through, dual oval muffler system with large free flowing 63.5mm (2.5”) piping produces no exhaust drone. Thanks to the two large SP mufflers, it has excellent sound suppression at idle and cruising. In spirited acceleration, the V8 exhaust note comes to life with a deep rich GReddy sound. The off-set slash-cut tips best match the GS-F’s aero styling. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

SOUND CLIP

Chassis:  L10
Engine: 2UR-GSE
Type:   dual muffler axle-back, with quad offset tips

Number of pieces:  2
Piping:   63.5 mm (2.5")
Tip(s):  4x  101 mm (4.0 ")
Gasket(s):     (re-)use OEM donut gaskets 
Resonator:   n/a

Weight:  17.2 lbs   (Stock weight  18.6lbs)

Sound Comparison (SAE J1169) Test: L 90 / R 90 dB(a)

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced. *Test results may vary from car to car

The Supreme SP for the 2006-13 Lexus IS350 / IS250 features sophisticated exhaust note with an aesthetically functional design. The classic dual oval muffler axle-back system with large free flowing 63.5mm (2.5”) piping is comfortable to drive. Thanks to the two large SP mufflers, it has excellent sound suppression at idle and cruising. In spirited acceleration, the straight-through design makes the exhaust comes to life with a deep rich GReddy sound. Tradition double wall GReddy tips on each SP best matches the styling of the vehicle. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

SOUND CLIP

Chassis: GSE20 - 2wd only
Engine:  2GR-FSE / 4GR-FSE
Type:   Dual muffler axle-back system

Number of pieces:  2pcs.
Piping:   63.5 mm (2.5")
Tip:   115mm (4.5")
Gasket(s):    2.5" oval (qty: 1 included) replacement
Resonator:   n/a

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test:  L:82 / R:82 dB(a)  @4800

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced. *Test results may vary from car to car

The Supreme SP for the 2015-on Lexus RC350 features up to a 10whp gain with a sophisticated exhaust note and an aesthetically artistic design. The classic dual oval muffler axle-back system with large free flowing 63.5mm (2.5”) piping produces no exhaust drone. Thanks to the two large SP mufflers, it has excellent sound suppression at idle and cruising. In spirited acceleration, the straight-through design makes the exhaust comes to life with a deep rich GReddy sound. The unique quad tip configuration, using two different diameters, in an unique layout to best matches the styling of the vehicle. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

SOUND CLIP

Chassis:  GSC30 - 2wd only
Engine:  2GR-FSE
Type:   Dual Muffler, Quad-tip axle-back system

Number of pieces:  2pcs.
Piping:   63.5 mm (2.5")
Tip(s):  2x Outer 82.5mm (3.25") / 2x Inner 89mm (3.5")
Gasket(s):    re-use/replace OEM gaskets (qty: not included) 
Resonator:   n/a

Weight:  34.4 lbs  
Sound Comparison (SAE J1169) Test:  L86/R85 dB(a)

HP:  +10 hp
TRQ:  +1  ft-lbs

NOTE: for installation, please invert the rubber mounting hanger, on the inner side of the muffler cansisters, to be above the muffler hanger.

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced. **Test results may vary from car to car

The Supreme SP for the Lexus IS300 sedan is a great combination of classic looks, deep refined sound and high-flow performance. The straight-through oval SP muffler has good ground clearance and allows for good flow while enhancing the sound of the USA-spec. inline 6 cylinder 2JZ-GE N/A engine. The large 3” diameter also makes it a great choice for additional upgrades and/or boost. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:   SXE10
Engine:   2JZ-GE 
Type:   Cat-back system

notes:  * not compatible with wagon model

Number of pieces:  2pcs
Piping:   76 mm (3.0")
Tip:   115 mm (4.5") x L 120mm (4.7")
Gasket(s):    3.0" oval (qty: 2 included) replacement
Resonator:   Yes

Weight:  33 lbs  
Sound level:  82 dB(a)

HP: +9.5 hp
TRQ: +14 ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for the Mazda RX8 features dual horizontally-mounted straight through mufflers connected by a smooth center “Y.” The larger 2.5” piping routing provides smooth flow. Dual wall Supreme SP tips fit nicely through the factory rear bumper exits. It’s a great sounding exhaust for a stylish 2004-08 RX8 cat-back. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:  SE3P
Engine:   13B-MSP
Type:   cat-back system
   (horizontaly mounted dual mufflers with dual tips)

Number of pieces:  2
Piping:   63.5mm (2.5")
Tip:   102mm (4.0")
Gasket(s):    2.5 " oval (qty: 1 included) replacement
Resonator:   n/a

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for the 4th generation ND Mazda Miata was designed and engineered specifically to suit the USA spec 2.0l Skyactiv-G engine combination. Unique to this application is the availability of either the pre-resonated axle-back muffler system, for maximum sound control with enhanced flow. Or there is also a full system, that includes a dual resonated mid-pipe for even more performance and a sportier sound. The full system showed power increase throughout the RPM band.  Both options use the same unique rear section with dual 82mm GReddy exhaust tips. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty

Chassis:  ND
Engine:  2.0l Skyactiv-G 
Type:   Rear Section only

Number of pieces:  1pc
Piping:   63.5 mm (2.5")
Tip(s):   2x. 82mm (3.25")
Gasket(s):    reuse OEM 
Resonator:   1x

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound Comparison (SAE J1169) Test: 80 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for the Mitsubishi Lancer GTS features a special compact oval SP muffler, with a stylish angled layout. The position of the muffler allows for a more direct exhaust flow, while the tuned internal straight-through design controls sound levels. The compact design also saves over 12lbs. off the car. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:  JA3AU
Engine:  4B11
Type:   axle-back

Number of pieces:  1pc
Piping:   63.5mm (2.5 ")
Tip:   102mm (4.0")
Gasket(s):   OEM  (qty: 0 included) 
Resonator:   n/a

Weight:  10.6 lbs   (Stock weight  22.75 lbs)
Sound Comparison (SAE J1169) Test:  89 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for the Mitsubishi Lancer GT features an extra compact SP style muffler with large 2.5” diameter piping. The angled layout minimizes bends and adds to the great looks. The factory compatible flange makes installation with the OEM gasket a breeze. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:  JA32U
Engine:  4B12
Type:   axle-back system

Number of pieces:  1pc
Piping:   63.5mm (2.5")
Tip:   102mm (4.0")
Gasket(s):   OEM (qty: 0 included) replacement
Resonator:   n/a

Weight:  10.1 lbs   (Stock weight  15.5 lbs)
Sound Comparison (SAE J1169) Test: 95 dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

Also Compatible with 2017 Toyota 86 and 2017-20 Subaru BRZ!

The Supreme SP for the Scion FR-S & Subaru BRZ features a large horizontally mounted, 3-section muffler with a center inlet and an unique, tuned, internal "Y-pipe." This directs exhaust gases through a center chamber to reduce overall sound and improves flow to the outer straight-through sections. These outer sections of the muffler have our updated high-temp, internal sound suppression system. The exhaust is finished-off with dual GReddy slant-cut, double-walled tips in the factory bumper outlets. This cat-back exhaust also uses a simplified exhaust pipe routing with a large straight-through resonator in the mid-pipe, to tune-out any drone. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

NOTE:  Becuse the Supreme SP for this model uses a factory type "donut gasket" flange to the factory piping, it fits both the 2012-16 FR-S / BRZ and the 2017-on "kouki" 86 / BRZ models (the slight change in the OEM factory over-pipe does not effect fitment on the Supreme SP). 

Chassis:   ZN6
Engine:   4U-GSE (FA20)
Type:   Cat-back system
 (horizontally mounted muffler with dual tips)

Number of pieces:  3
Piping:   63.5 mm (2.5")
Tip(s):   2x 115mm (4.5")
Gasket(s):  2.5" oval (qty: 2 included) replacement
Resonator:   Yes

Notes:  reuse factory doughnut-gasket and spring bolts for mid-pipe

Weight:  34.8 lbs   (-3.3 lbs)
Sound Comparison (SAE J1169) Test:  L82 / R83 dB(a) @4500RPM 

Dyno Chart
HP:  +6 hp
TRQ:  +7.5  ft-lbs

* also fits 2017 Toyota 86  Manual Trans 

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced. **Test results may vary from car to car

The Supreme SP for the Subaru STI hatchback features a large horizontally mounted, 3-section muffler with a "tucked-away" layout. This routing allows for the large 3” diameter piping to more smoothly enter the muffler’s center section. Exhaust gases exit each side of the revised muffler via the two 2.5” diameter piping to quad staggered 3.5” GReddy double-wall slash cut tips, The non-tapered 3” mid-pipe also encases a large resonator section to tune-out drone. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:  GRB
Engine:  EJ25
Type:  cat-back system
  (horizontally mounted muffler with dual outlets)

Number of pieces:  3
Piping:   76 mm (3") - 2x 63.5mm (2.5")
Tip(s):  4x 89mm (3.5 ")
Gasket(s):  3" oval (qty: 2 included) replacement
Resonator:   Yes

Notes: reuse factory doughnut-gasket and hardward for mid-pipe

Weight:  39.8lbs  (-2.8lbs)
Sound level:  L82 / R83 dB(a) @4000

Dyno Chart
HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for the (VA) Subaru Sedan features large dual oval mufflers and quad staggered tips in a "tucked-away" layout, for maxium muffler ground clearance. Large 76mm (3”) piping is carefully routed around the rear differential to a centralized Y-section for more even flow. This creates and improved performance with exceptional sound for both the EJ powered STI and FA powered WRX applications. The system is finished off with classic quad Supreme SP 89mm laser engraved GReddy tips. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Chassis:  VA2 / VA1
Engine:  EJ257 / FA20T
Type:   cat-back, dual muffler system

Number of pieces:  4
Piping:   76 mm (3") - 2x 63.5mm (2.5")
Tip(s):   4x 89 mm (3.5")
Gasket(s):    2x 2.5" & 1x 3" oval (qty: 3 included) replacement(s)
Resonator:   No

Weight:  TBA lbs   (Stock weight  TBA lbs)
Sound level:  TBA dB(a)

HP:  +TBA  hp
TRQ:  +TBA  ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced

The Supreme SP for the Subaru STI Sedan features much larger diameter piping, resonators and mufflers, but also smoothes the layout for maximum performance with good sound suppression. This cat-back exhaust starts out with a full 3” mid-pipe with a large straight-through resonator to tune out drone. The next section smoothly transitions into dual 2.5” diameter piping. Improved dual GReddy straight-through mufflers with dual, double wall tips on each muffler finish off the exhaust. GReddy designers carefully position the dual mufflers and staged tips to flow with the GV-chassis’ bodylines. Like all GReddy Supreme SP systems the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

SOUND CLIP

Vehicle(s): WRX & STI Sedan
Chassis:  GV8
Engine:  EJ257
Type:  cat-back, dual muffler system

Number of pieces:  4
Piping:   76 mm (3") - 2x 63.5mm (2.5")
Tip(s):  4x 89 mm (3.5")
Gasket(s):  2x 2.5" & 1x 3" oval (qty: 3 included) replacement(s)
Resonator:   Yes

Weight: TBA  lbs  
Sound level:  L89 & R91 dB(a) @4000

Notes: reuse factory doughnut-gasket and hardward for mid-pipe

Dyno Chart
HP:  +14 hp
TRQ:  +22 ft-lbs

*Data collected on stock vehicle    *Retains catalytic convertor, front pipe    
*TBA = To Be Announced