All Exhaust

The EVOlution GT exhaust for the BNR32 Nissan Skyline GT-R is the ideal combination of performance, sound and JDM styling. The cat-back system aims to bring modern advancements to this Japanese turbocharged classic. The 76mm piping and compact EVO GT muffler with off-set tip, offer improved ground clearance over older exhaust systems, while still offering excellent flow through the straight though design. The deep growl of the RB26DETT is enhanced, while eliminating any drone, with use of our large center pipe resonator and extra long EVO canister. Refined sound, new and improved materials with timeless GReddy Evo styling, make this system the perfect choice for newly imported BNR32 Skyline GT-Rs.  Like all GReddy EVOlution GT systems, the fully hand-welded 304 Stainless-Steel exhaust, carries our Limited Lifetime Warranty.

SOUND CLIP

Chassis: BNR32
Engine: RB26DETT
Type: Cat-back system

Number of pieces: 2
Piping: 76 mm (3")
Tip: 115 mm (4.5")
Gasket(s): 3" oval (qty: 1 included) replacement
Resonator: yes

Notes:

Weight: 24.4 lbs 
Sound level: 100dB(a) @5600RPM

Dyno Chart
HP: TBA hp
TRQ: TBA ft-lbs


*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced

Chassis: BNR32
Engine: RB26DETT
Type: Cat-back system



 

Power Extreme R BNR34 Ver.2

■ Adopts a completely straight structure that emphasizes exhaust efficiency, which has been established in the GReddy muffler series.

■ High quality sound that emphasizes power while eliminating sound in the room

■ Double 102Φ tail that best matches the notch of the rear bumper creates a powerful rear view

■ We buff finish SUS 304 material and consider durability

■ Produce a sense of quality with the adoption of a titanium-like heat gradation tail

■ Reliable JASMA muffler (conforms to security standards)

SOUND CLIP

Chassis: BNR34
Engine: RB26DETT
Type: Cat-back system


Specs:

■ Main pipe diameter: 80Φ ～ 60Φx2 ■ Exchange part: After catalyst
■ Division number: 2 divisions
■ Material: Stainless steel
■ Tail shape: 102Φ titanium-like heat gradation
■ Product close exhaust noise: 93dB / 5100rpm
■ Genuine proximity exhaust noise: 92dB / 5100rpm
■ Minimum clearance: 92mm: middle silencer
(Fender height: Right front 659mm / Left front 660mm / Right back 658mm / Left back 659mm
Note: The measurement vehicle is a vehicle with harmonic drive
■ Accessories: 80Φ oval gasket x2 / 10x25mm bolt x2

Power Extreme R BNR34 DD

Produces a stylish rear view with a spartan using a small-diameter dual silencer.

Product features

■ Adopts a small diameter dual silencer for the rear silencer and produces a stylish rear view with Spartan

■ In order to meet safety standards while adopting a rear small-diameter silencer, a total of four silencers and an additional resonator (with GReddy logo plate) are installed, and silence is achieved with a straight structure without using a diaphragm or partition inside the silencer.

■ Simple silencer arrangement for powerful sound quality outside the car and comfortable interior space without muffled sound

■ Considering texture and durability with buffed SUS304 material and full Tig welding

■ Produce a sense of quality with the adoption of a titanium-like heat gradation tail

■ JASMA certified muffler for safety (security standard compliant)

SOUND CLIP

Chassis: BNR34
Engine: RB26DETT
Type: Cat-back system

Number of pieces: 2
Piping: 76 mm (3")
Tip: 115 mm (4.5")
Gasket(s): 3" oval (qty: 1 included) replacement
Resonator: yes

Specs:

■ Main pipe diameter: 80Φ-60Φx2
■ Exchange site: After the catalyst
■ Division number: 2 divisions
■ Material: Stainless steel
■ Tail shape: 90Φ titanium heat gradation
■ Product close exhaust noise: 93dB / 5100rpm
■ Genuine proximity exhaust noise: 92dB / 5100rpm
■ Minimum ground clearance: 91mm: middle silencer
(Fender height: Right front 658mm / Left front 660mm / Right back 657mm / Left back 658mm)
   Note: The measurement vehicle is a vehicle with harmonic drive
■ Accessories: 80Φ oval gasket x2 / 10x25mm bolt x2 / attached stay / attached insulator

GReddy JDM-spec TRUST PE-TR exhaust for 
1995-98 Nissan Skyline GT-R 

Chassis: BCNR33
Engine: RB26DETT
Type: Cat-back system

Number of pieces: 2pcs
Piping: 80 mm (3.14")
Tip(s): 118mm (4.65") TRUST sliding tip (40mm range)
Gasket(s): 80" oval (qty: 2 included) replacement
Resonator: resonating-volume canister
Notes: Made in Japan, TRUST logo

GReddy JDM-spec TRUST PE-TR exhaust for 
1989-94 Nissan Skyline GT-R 

Chassis: BNR32
Engine: RB26DETT
Type: Cat-back system

PE-TR VIDEO

Number of pieces: 2pcs
Piping: 80 mm (3.14")
Tip(s): 118mm (4.65") TRUST sliding tip (40mm range)
Gasket(s): 80" oval (qty: 2 included) replacement
Resonator: resonating-volume canister
Notes:  Made in Japan, TRUST logo

GReddy JDM-spec TRUST PE-TR exhaust for 
1999-02 Nissan Skyline GT-R 

Chassis: BNR34
Engine: RB26DETT
Type: Cat-back system

Number of pieces: 2pcs
Piping: 80 mm (3.14")
Tip(s): 118mm (4.65") TRUST sliding tip (40mm range)
Gasket(s): 80" oval (qty: 2 included) 
Resonator: resonating-volume canister
Notes: Made in Japan, TRUST logo